znalazłem na angielskim forum:
N.B. : For all these operations, follow the procedure in the diagnostic tool. 1. Replacing the automatic gearbox without replacing the ECU Perform the following operations :
- Initialisation of the neutral position of the gear selection lever position sensor
- Adaptation programming procedure of the oil pressure solenoid valves and regulators
- Initialising the autoadaptives
- Reset to zero of the oil usage counter
2. Replacement of the automatic gearbox ECU Perform the following operations :
- Read the value of the gearbox oil usage counter from the old ECU
- Write the oil usage counter value into the new ECU
- Initialisation of the neutral position of the gear selection lever position sensor
- Adaptation programming procedure of the oil pressure solenoid valves and regulators
- Initialising the autoadaptives
3. Replacing the automatic gearbox and the automatic gearbox ECU Perform the following operations :
- Initialising the autoadaptives
- Reset to zero of the oil usage counter
- Adaptation programming procedure of the oil pressure solenoid valves and regulators
4. Draining the automatic gearbox oil Perform the following operations :
- Adaptation programming procedure of the oil pressure solenoid valves and regulators
- Reset to zero of the oil usage counter
N.B. : For downloading of the automatic gearbox ECU, there is no specific operation ; Follow the diagnostic equipment procedure. CAUTION : For a certain period, a quality of gear change can be obtained which is more or less satisfactory (adaptation of ECU parameters to the gearbox). To obtain satisfactory gear changing quality, it is necessary to carry out a road test involving frequent gear changes (Auto-adaptive laws).
Czyli wynika z tego, że 4 opcja (wymiana oleju) resetuje licznik i uruchamia tylko adaptację elektrozaworów (ciśnienia oleju).
Natomiast opcja 1 (wymiana skrzyni bez ECU) resetuje licznik ale uruchamia procedury: adaptacji wybierania biegu N, elektrozaworów, autoadaptację